Customers concern was the dishes were not getting clean they felt they had a problem with the pump. Upon arrival and inspection I found that the pump and failed the control board had shut off the heater. I replaced the pump check for leaks and cleaned all the surfaces. Ran it through service diagnostic mode and found the heater to be working great and all the systems checked out. The dishwasher is now fixed.; used 1 w11084656 (MOTOR) from stock

No power at outlet. I looked and could not find a blown GFCI or outlet. I plugged it into another outlet using as extension cord. It started instantly. The customer will work with a electrician to restore power to the washer.; (serial indicated as 'NotAvailable' so system created UIS w/pseudo #)

"Led display loose, dishwasher does not run. This unit would need a complete user interface with touchpad and a control board to complete repairs. I also found an active leak underneath the unit as well. I didnt even address the leak as the total was already higher than the customer wanted to spend. I Spoke with customer they are not willing to invest heavily into this machine that is obsolete. No quick repairs were possible they will replace the unit."

"I replace the blower igniter and coils. The dryer no longer makes noise and heats perfectly.; used 1 279311 (IGNITER), and 1 5303931775 (COIL KIT) from stock"

Pf error when I try to start the dryer. I checked the power supply the power block and found ultimately is that the control board is failing when its under load. The part is not made anymore please see what you can find let customer know. Note this dryer has seen better days. WP8546219 - NLA; saved tckt