Model KDTE204KPS0
Customer stated unit was not mounted properly. Found cabinet holes present but no mounting screws installed. Installed new screws and secured unit properly.
KitchenAid repair
KitchenAid Dishwasher Repair
Fast, professional KitchenAid dishwasher repair from technicians who fix KitchenAid dishwashers frequently. Same or next business day on most calls.
- Factory-authorized KitchenAid service
- Upfront Appliance Blue Book pricing
- Stocked vans, so many repairs are done in one visit
- 10-year parts warranty, 60-day labor warranty*
- 64KitchenAid dishwasher repairs in our records
- 4.8average customer rating
Factory-authorized
Why factory-authorized KitchenAid service matters
- Factory-trained techniciansOur technicians are trained by KitchenAid and work on KitchenAid appliances frequently.
- Genuine KitchenAid parts, fastWe get genuine manufacturer parts directly, so the right part arrives faster.
- A direct line to KitchenAidOur technicians can reach the manufacturer's own technical and engineering support teams, so the tough problems get solved faster and done right.
What we fix most on KitchenAid dishwashers
- Leak or door gasket
- Circulation pump or motor
- Drain pump
- Filter or clog
- Spray arms
- Water inlet valve
Counted from our technicians' notes on 64 KitchenAid dishwasher service calls.
Leaks, dirty dishes and water left in the tub
Water on the floor tends to come from a worn door gasket, a loose fill connection or a leak down in the base. Many models have a drip tray with a float switch under the tub, and once water gets into that tray the cycle stops. Dishes that come out dirty or with a gritty film point to a clogged filter, plugged spray arm holes or a weak circulation (wash) pump.
When water is still sitting in the tub after a cycle, look for a clogged filter, a kinked drain hose, a blocked disposer inlet or a failing drain pump. A machine that won't fill, or fills slowly, has either a closed supply valve or a water inlet valve that's going bad. One that hums but doesn't wash is pointing at the circulation pump or motor more often than not.
Reading F and E codes
On a model with a display the code simply reads as F#E#. No display? The Clean light blinks it out in two bursts with a short break between them. The F number is however many flashes come before the break, and the E number is how many come after it. Codes vary by model, so check your manual if yours isn't in the table.
| Code | What it usually means |
|---|---|
| F1E1 | Problem with the control module |
| F7E2 | Wash motor fault |
| F8E4 | Leak, water found in the drip tray |
| F8E5 | Fill valve stuck open |
| F9E1 | Drain is taking too long or not happening |
| F9E2 | Drain motor fault |
Seeing F8E5? Shut off the water supply to the dishwasher first, then give us a call.
Five things to try before booking a visit
- Clean the filter under the bottom rack. On two-piece designs, the upper section releases with a quarter turn counterclockwise. Rinse both parts under the tap and lock them back in place with no gaps showing.
- Check that the drain hose behind the dishwasher isn't kinked, and run the garbage disposer to clear it.
- On a brand-new install, make sure the disposer knockout plug was actually taken out.
- Cut power for 30 seconds at the plug or the breaker, then restore it.
- Suds mean dish soap got in there. Let them settle and use automatic dishwasher detergent only.
For the model number, open the door and check the tub frame on its left edge. On double-drawer models, look at the top drawer's right-hand side instead.
Hard water and your filter
Hard water is common across our Minnesota and Wisconsin service areas. Calcium builds up on the filter and inside the spray arm holes, and wash results suffer long before any part actually breaks. Clean the filter every few months, or monthly if you run four or more loads a week without scraping, and run a dishwasher cleaner about once a month.
Is it worth fixing?
Pumps, valves, gaskets and spray arms can all be replaced, and the stainless tub in most KitchenAid models holds up for many years. The main exception is a leak that has rusted the frame or rotted the floor underneath, and then a new dishwasher makes more sense.
Recent KitchenAid dishwasher repairs
Model KDPE234GPS0
Customer stated dishwasher was not washing. Diagnosed failed motor assembly. Obtained part locally, installed motor assembly, and confirmed dishwasher is now working properly.
“Michael did a great job. Knew exactly what the problem was and fixed it quickly and correctly. Thanks!”
Kathy E.
Model KDTM604KPSO
Found heavy suds inside the drip tray, causing leakage through the front seal. Ran a test cycle to show the customer the suds were present even without adding detergent, cleared the suds, and cleaned out the garbage disposal.
“Collin made my malfunctioning dishwasher experience the highlight of my week. He took such interest in explaining what had gone wrong and how to avoid problems in the future that it made the world seem a brighter place!!’”
Mary S.
Model KDTE104EWH1
Installed new drain hoses and ran test cycle. Unit is operating properly.
Model KDTM504EPA0
Replaced clogged spray arm causing grinding noise and leak. Tested dishwasher and verified normal operation.
“Eric did a great job replacing a bad part. He is professional and knowledgeable.”
Steve R.
Model KDFE204EBL1
Installed a new wash pump, ran a quick cycle, verified no leaks, and confirmed normal operation.
“Mark was great. Was careful while taking our dishwasher in and out, he cleaned up when he was done and was very informative as to what we needed to get our dishwasher working without trying to sell us something we didn’t need”
Venisa D.
Model KDTM354DSS5
Replaced water valve. Ran test cycle and verified proper fill with no leaks. Dishwasher operating normally.
“Eric was great! Knowledgeable and kind!”
Fredrick S.
Model KDTM404KPS1
Replaced console touch panel, tested responsiveness, all functions operating properly.
“The appointment was scheduled in a timely manner. Dalton arrived on time and was professional, courteous and knowledgeable. The repair required a part which Dalton ordered and installed without any hassles. I would recommend Omega and Doltan for service and repairs. Thanks!”
Carolyn W.
Model KUDM01TJBS0
Installed customer-supplied door opener kit; ran and tested; good to go.
“I appreciated Omega keeping me informed with updates about when my technician would arrive. Erik did a great job repairing my not-so-new dishwasher. He was prompt, efficient and answered all my questions.”
Louise E.
Model KUDS35FXSS1
Installed the bracket and soap dispenser and screws and cycled and tested with no leaks.
Model KDFE104DSS5
Replaced dishwasher motor/sump assembly, spray arms, and door gasket; unit washing properly with no leaks.
“Michael was knowledgeable and efficient. He was very pleasant and explained the issue with the dishwasher. I was happy he got the dishwasher going quickly. Betty”
Elizabeth (betty) M.
Model KUDS02FRSS1
Replaced water valve, tested and found no leaks; dishwasher operating properly.
“Delton was knowledgeable, and did the repair work efficiently and professionally. I am very satisfied with the work he has done for us. I am very grateful for Delton and Omega Force Appliance Repair.”
Aniso S.
Model KUDS01DJSP0
Verified the dishwasher heater is operating properly in diagnostics, then recommended a regular cleaning regimen and advised the customer to run a dishwasher cleaner about twice a month to prevent buildup.
“Friendly and knowledgeable!”
Angie Van De W.
Model KDTM504EPA0
Customer complained of leaking, found leak from sump and spray arm not rotating, replaced sump and spray arm locally, tested, no leaks, unit working properly
“He fixed the problem, but didn't exude confidence. It also took him a while to acknowledge that a problem existed.”
Charlie L.
Model KDFE104HPSO
Replaced failed dishwasher motor/pump assembly, verified no leaks, unit washing properly
“Collin was great.”
Wes J.
Installed new adjusters, unit operating properly.
Model KDTM354DSS5
No user interface lights or control. Replaced UI board. Tests good.
“Kinnon was efficient! Great service!!”
Patty Or Randy B.
Model KDTE334GPSO
Returned with correct sump ? replaced and fully tested, unit working properly.
“Jacob is great. He is direct and honest. He forgot something and just said he forgot something. No excuses, just truth. He was considerate, followed through, and did a good job. His initial quote was very accurate. I will use Omega again because of him.”
Scott W.
Model KUDS30IVBS4
Replaced soap dispenser and screws, cycled and tested?no leaks detected.
“Top notch service!”
Shawn T.
Model KDTM604KPS0
Installed new water valve in dishwasher?tested and leveled unit, operating as expected.
Model KUDS01DLBL2
Installed new sump and tested for leaks?none found; unit operating properly.
“Brandon is very knowledgeable, efficient and thorough. I also enjoy chatting with him while he works. He’s my appliance guy.”
Pat F.
Model KDTM604KPS0
Installed the new heater, cycled and tested checked for leaks.
“Brandon was great!!! Will definitely let others know about the service .”
Judy B.
Model KDTM404KPS0
Replaced diverter. Tested. Works as it should
Model KUDS30IXWH8
Installed new door seals. Ran and tested fine.
“Omega was very prompt in not only scheduling my appointment but also in the repair of my dishwasher. I would definitely have them again for repair work.”
Virginia W.
What KitchenAid dishwasher owners say
Rated 4.8 out of 5 stars by 64 KitchenAid dishwasher repair customers“Michael did a great job. Knew exactly what the problem was and fixed it quickly and correctly. Thanks!”
“Collin made my malfunctioning dishwasher experience the highlight of my week. He took such interest in explaining what had gone wrong and how to avoid problems in the future that it made the world seem a brighter place!!’”
“Eric did a great job replacing a bad part. He is professional and knowledgeable.”
“Mark was great. Was careful while taking our dishwasher in and out, he cleaned up when he was done and was very informative as to what we needed to get our dishwasher working without trying to sell us something we didn’t need”
“The appointment was scheduled in a timely manner. Dalton arrived on time and was professional, courteous and knowledgeable. The repair required a part which Dalton ordered and installed without any hassles. I would recommend Omega and Doltan for service and repairs. Thanks!”
“I appreciated Omega keeping me informed with updates about when my technician would arrive. Erik did a great job repairing my not-so-new dishwasher. He was prompt, efficient and answered all my questions.”
“Michael was knowledgeable and efficient. He was very pleasant and explained the issue with the dishwasher. I was happy he got the dishwasher going quickly. Betty”
“Delton was knowledgeable, and did the repair work efficiently and professionally. I am very satisfied with the work he has done for us. I am very grateful for Delton and Omega Force Appliance Repair.”
“Jacob is great. He is direct and honest. He forgot something and just said he forgot something. No excuses, just truth. He was considerate, followed through, and did a good job. His initial quote was very accurate. I will use Omega again because of him.”
“Brandon is very knowledgeable, efficient and thorough. I also enjoy chatting with him while he works. He’s my appliance guy.”
“Brandon was great!!! Will definitely let others know about the service .”
“Omega was very prompt in not only scheduling my appointment but also in the repair of my dishwasher. I would definitely have them again for repair work.”
KitchenAid dishwasher repair FAQ
What goes wrong most often on KitchenAid dishwashers?
In our technicians' notes on 64 KitchenAid dishwasher service calls, the repairs that come up most involve the leak or door gasket, circulation pump or motor and drain pump. The list near the top of this page shows the rest.
How many KitchenAid dishwashers have you repaired?
64 KitchenAid dishwasher repairs are in our service records so far, and customers rated those visits 4.8 out of 5 stars.
What does F9E1 mean on a KitchenAid dishwasher?
It means the dishwasher took too long to drain. Go after the easy causes first. Check for a clogged filter under the bottom rack, a kinked drain hose, a full or clogged garbage disposer, or a blocked air gap. On a new install the disposer knockout plug may still be in place. If the code comes back after all that and a power reset, the drain pump is the likely culprit.
How do I read the blinking Clean light on my KitchenAid dishwasher?
Watch the Clean light. Say it blinks seven times, goes dark for a second or two, then blinks once. That's F7E1, with the flashes before the short break giving you the F number and the flashes after it giving you the E number. Expect a longer gap of about five seconds before the whole thing repeats. Models with a display just show the code.
When should I clean the filter in my KitchenAid dishwasher?
KitchenAid's general guideline is every three to six months, but how you use the machine matters. Running four to seven loads a week without scraping calls for monthly cleaning. A few scraped loads a week might only need it once a year. Some models have a Clean Filter light, and maintenance-free models just need the small debris cup emptied.
Why is there water in the bottom of my KitchenAid dishwasher?
A little water around the filter area is normal on many dishwashers. More than that points to a clogged filter, a kinked or clogged drain hose, a blocked disposer connection or a failed drain pump. Clean the filter and look at the hose first. Water still sitting in the tub afterward, or an F9E1 or F9E2 code, means the drain system needs a closer look.
How much does KitchenAid dishwasher repair cost?
The trip and diagnostic fee starts at $129. Your technician quotes the repair upfront using the Appliance Blue Book, before any work begins, so you can decide with no surprises.
Are you a factory-authorized KitchenAid service provider?
Yes. Omega Force Appliance Repair is a factory-authorized KitchenAid service provider.
Is the repair guaranteed?
Repairs you pay us for directly come with a 10-year warranty on parts and a 60-day labor warranty. When a manufacturer, home warranty company or other third party pays for the repair, that company's warranty applies instead.
Omega Force Appliance Repair is a factory-authorized KitchenAid service provider.