Installed the fan, made sure the fan came on. Informed the customer the fresh food compartment might take up to 24 hours to cool off

Returned installed the heat element, cycled and tested the oven is heating as it should

Customer states the refrigerator has water under the bottom tray and is molding. Found the refrigerator full of food, helped the customer remove. Removed the shelfs and the back cover found the drain was plug, cleaned out both drain lines. Informed the customer of the vents and showed them where not to block. Also made sure the fans were working.

Installed the pump and the belt and idler kit. Cycled and tested made sure the washer worked as it should and there were no leaks.

"Customer states the washer would have issue draining from time to time. Checked and the only active code was for a pump issue. The customer had already fixed the door lock issue. Customer approved a new pump. Check and the old pump had a lot of play in the propeller bearing. Installed new pump, cleaned out the pressure port. Cycled and tested checked for leaks. The washer is working as it should. ; pckd up 1 4681EA2001T (Pump)"