MAKING A LOUD RATTLING NOISE AFTER REPAIR. Found theres a vibration noise when the magnetron comes on. I pulled oven out and its coming from the back on one of the guards. I removed it and cant see anything wrong. Reassembled and tested still making a vibration noise. I put some foam pieces in and now its much better.

Install new motor from last diagnosis once installed tested multiple times make sure it was working properly and no leaks

The customer had both oven on at 500 when I arrived. After a few minutes the burners stopped working. I found the spark module wire had plastic wire nuts attached. I replaced the wire nuts with ceramic and now the burners are working.

On arrival unit was unplugged. He plugged it in door lock his locked drain pump runs continuously. First thing I did went through whirlpool test for that air code found that its a bad pressure sensor. Replaced pressure sensor tested now. Unit unit is working properly.

"Customer complaint is unit is not washing dishes and its been out for three years. They had another company out there that thought it was a bad control board. They installed a control board and still no luck tested unit. Its getting power to the motor motor itself is not running as sump assembly. quoted blue book. Customer approved, ordered part and rescheduled.; ordrng 1 WPW10591570 (PUMP MODULE COMPLETE)"