Dishwasher would not power on due to known software issue. Completed manufacturer software update which resolved problem. Tested dishwasher and confirmed proper operation.

Customer reported intermittent freezing and warming in refrigerator. Tested thermistors and confirmed normal operation. Found cardboard case blocking thermistor airflow. Removed obstruction and advised customer to keep vents and sensors clear.

Customer states that some loads vibrated the washer to when it will move on the floor. Found that the washer was put upstairs on old uneven tile floor. I ran test with load of towels and washer did complete and went into high speed spin but the floor did vibrate quite a bit and you can feel it few feet away. I leveled washer and suggested to use anti skid pads to prevent the washer moving on smooth tiles.Also recommended to use more items when washing items to help washer balance out more easily and have less vibration. Washer is working normally.

Installed new induction cooktop glass top AGU75049023, tested all burners and verified proper operation.

Refrigerator at 50 degrees with 22E error, diagnosed ice buildup preventing evaporator fan operation, defrosted drain and repositioned defrost sensor, tested and unit cooling properly.