Fast service. Upfront pricing. Professional technicians.
Home / Service History 216
Recent work

Service History 216

Notes from real Omega Force service calls: the appliance, the problem we found and how we fixed it.

Repairs completed November 18, 2024 to November 25, 2024

Speed Queen DryerNov 18, 2024Falcon Heights, MNTechnician: Lucas

Model ADG3SRGS113TW01

Replaced timer and wire harness and tested unit operation. Now cycling and heating perfectly

Electrolux DryerNov 18, 2024Prior Lake, MNTechnician: Delton

Model ELFE7637AW0

Customer states that the dryer will intermittently stop mid cycle even in timed dry and will have to restart it where it left off . Also customer said that it takes 2-3 cycles to dry clothes.The dryer did stop/pause 10 minutes into timed dry cycle and I had to hit start to get it running again. I replaced touch pad user interface and main board.I ran test of temperature inside dryer with vent disconnected and it is cycling heat normally. I attach vent and it would get much hotter inside dryer and would not dissipate the heat very fast which could cause moisture and long dry times since its not venting out the hot/wet air outside to dry clothes efficiently.I showed customer but dryer is on 2nd floor and looks like it vents out though the roof. Customer will get it looked it.Dryer itself is working good as im here.

Liebherr RefrigeratorBuilt-inNov 18, 2024Minneapolis, MNTechnician: Evan

Model SN-T660984

Completed ice maker replacement. Unit is now operating properly.

“Great customer service!!”

Joan R.
Frigidaire RangeNov 22, 2024Saint Paul, MNTechnician: Dakota

Model GCFG3060BFA

Customer states stain on oven floor wont come off, instructed customer on cleaning oven interior. I was able to get the stains off with a scotch brite pad and mild detergent

“Super nice kid. He did an excellent job.”

Laura S.
GE RefrigeratorNov 22, 2024Medina, MNTechnician: Matt

Model GNE27JYMWFFS

Water not dispensing. Customer said water dispenser and ice maker have never worked. When you press the filter button it says error. I hooked up SmartHQ and theres a filter RFID error. The filter board is not seeing the filter so its not going to allow water through the filter. This filter is supposed to have a chip in it and it looks like its a not a OEM filter. Customer is going to get a OEM filter and try that.

“Matt diagnosed te problem and it turned out to be correct. Very satisfied”

Janet K.
GE RefrigeratorNov 22, 2024Monticello, MNTechnician: Paul

Model GTS22KGNCRWW

Customer stated refrigerator warm. Found evap fan motor stuck without obstruction. Pushed motor and it turned for awhile again, then stuck. Diagnosed faulty evap fan motor. Verified control and defrost. Replaced fan motor and blade. Refrigerator working properly again.

“Nice experience, actually the best experience I’ve had with an appliance repair person.”

John K.
Whirlpool RangeNov 22, 2024Saint Paul, MNTechnician: Hyrum

Model WGE745C0FS

Upon arrival, customer states that knob just spins and doesnt engage the switch. Replace knob with part provided and tested. Machine seems to be working properly now.

“Excellent service, friendly and prompt”

Molly L.
Samsung DryerNov 25, 2024Cold Spring, MNTechnician: Brandon

Model DV42H5200EP/A3

Customer states the dryer is not heating, found the heat element had failed. Customer approved the repair, replaced the heat element assembly, vacuumed out the dryer and lubed the dry rollers. Cycled and tested the dryer is now heat as it should.

LG WasherNov 25, 2024Elk River, MNTechnician: Paul

Model WM3670HVA

Customer stated washer not draining and has an OE error code. Diagnosed failed drain pump. Replaced faulty pump. Put unit thru test mode twice. Washer in good working order.

“Paul was a great technician. He confirmed our price that was quoted from the office. He did the job in a timely manner. Very happy with the same day. Our washer works great. Thank you.”

Ron B.
Call Book