Installed inlet valves and door boot! Tested unit made sure it wasnt leaking . Ran it for a test cycle ! Filled it up all the way ! No leaks! Working great !

The washer displayed the 65 error. Today I replaced the motor drive board. The washer tested good.

They said it stops and sometimes finishes but wont start. They have to reset the power. They think the code was 65. The 65 code is for the drive board and if that fails it will lock out the washer until power is reset. I called and gave the quote. Im ordering the drive control board. Returning Monday. 2024* 6519950Drive board 204659P; ordrd 1 204659P (CONTROL DRIVER BOARD)

"UPON ARRIVAL MICROWAVE WAS TOTALLY NON-OPERABLE, BLANK SCREEN DEAD OPENED IT UP AND CHECKED THE FUSE. FUSE IS GOOD CHECKED THAT THERE IS POWER OUT THE OUTLET. TOOK MICROWAVE DOWN AND STARTED CHECKING ALL OF THE THERMOS. DISCOVERED THE CAVITY THERMAL WAS BAD. REPLACE THE THERMAL ON THE TOP WITH A GENERIC FROM MY TRUCK. SEEMS TO BE WORKING MUCH BETTER NOW. Tested it and heats great.