Customer says dryer shuts off after 2 seconds of starting it. As i got here the breaker to the dryer was off. I turned on breaker and dryer turns on and is cycling heat normally for over 20 minutes. I pulled out dryer and checked all connections and nothing is shorted. Dont know if its breaker issue since dryer is running and working good as im here.They will use as normal and call back if problem continues.

"Door latch is broken. JR can you see if anyone has it and call customer to let them know if it is? If it is, they would like to do repair. 5304525219 is part number. ; saved tckt"

"Found that the door hinges are bent. Looks like someone stepped or pushed door down and caused hinges and inner panel to bend causing door not to shut. I bent back the hinges and door now lines up and door latch pulls door shut. Door now opens and closes nicely.Tested and dishwasher is running and working with no leaks.Office: I added wrong pictures to this work order so ignore the washer photos I took photos of bent door. I informed customer that doors are not covered under the service plan but I told her that i would have the office double check and to call her and let her know. Other than that, after i bent back the hinges the dishwasher door shuts and appears to work good.; saved tckt"

"Found that the water valve to washer was shut off, washer couldnt fill and would get error. Turned on water and washer fills and agitates.Washer is working good."

"Installed rebuild inverter board, tested and compressor turns on and is running. Refrigerator is starting to cool and is working good."