Customer smelled gas in laundry room. Gas company came out and red tagged dryer stating gas leak inside dryer. I found there was a small leak from gas valve inside dryer. Also the rollers, belt and pulley are worn. Would need gas valve assembly part and repair kit.Called Cindy autho contact and they due to costs and age of dryer they will replace it.

Arrival open up the machine and discovered a inefficient compressor. Remove the refrigerant from the system and cut out the old compressor. Installed new compressor. Charged with refrigerant and tested. Machine working properly.

I access the main power control board. I removed the power supply, harnesses and unsecured the main power control board from its housing. I installed the new main power control board and attached all wire harnesses to their respective homes. I reassembled the back panel on the range and plugged through appliance in, tested my repair by turning on the oven and watching the cavity heat up. The surface elements all turn on as well. The range is back to full function. EBR 42005101. Main power control board.

The defrost timer was stuck in between cooling and defrost cycles. I replaced the defective timer and verified the compressor and other cooling cycle components returned to function after power was restored. The refrigerator began cooling and working its way to set temperatures.The customers asked me to swap the door swings from the right side to the left side, they asked the delivery company but were told no. I transferred hardware on the freezer and fresh food doors to allow the door to open left to right.; pckd up 1 5304526183 (Defrost timer)

I maneuvered the lid assembly flush with the washer cabinet and secured it in place.