"The customer complaints are, the dishwasher leaks from the left corner of the door, the dishes dont clean well and not all the soap washes out the soap cup and the lock icon is stuck on the display. I found the control panel is not locked and the buttons do respond when pushed. I looks like there is some moisture stuck in the display. I added a picture. The lower spray arm has stuff stuck in the spray arm and that clogging up the small holes. I found a round piece of rubber in the filter basket. That could have been restricting the water pressure. I found a dent on the edge of the inner door. That dents looks to be causing the water leak. The water is able to leak past the gasket where it seals against the inner door. I was able to clean the basket and the lower spray arm. The dishwasher will need the inner door, the door seal and the user interface control display. Please check pictures and find the parts needed them contact the customer with a quote. I did try holding the temp 3 waves lines but the lock light is still on. Also the customer showed me the lower rack is missing parts? And the silverware basket doesnt really anywhere well. I also found the upper rack is missing a spray arm. I added more pictures. ; snapped 8 QuickPics, states that autho needed"

Complaint is that it was making a gurgling sound. It hasnt made it for a few days. Not making it while I was there. No video. Told customer normally its the refrigerant moving through the system that makes that. 2.5 year old fridge so its at the age where it could be starting to make sounds. Plugged in newfi and temps have been consistent at 37 and -15 to 0. No error codes other than a door getting left open 67 days ago. All is good.

"Freezer is zero and fresh food is 39. Set to coldest setting. There was some frost on evaporator when I got here but it was in defrost. I steamed off the evaporator and let it run for 25 minutes. After 25 minutes, it was back down to zero. Confirmed defrost works. Nothing to fix on this one.

"Giving F20 error. Tested the drain pump 6 times. Drained great every time. Also, tested it on spin, rinse, agitate, a drain and spin, rinse and spin, and a power wash. Recommended running affresh through the washer a few times to get rid of stink. Also found the f20 means that theres a water fill error, and the water (cold) to the washer was turned off. Turned on the water at the beginning of tests and never got any errors. Everything runs great now.

"Dishwasher giving e24 error. Found the filter cover wasnt installed properly. Also over sudsing in dishwasher, not cleaning well. Checked water hardness level, which was soft, only a 3. Found the rinse aid leaks out of the dispenser, they dont want to replace that so they just wont use rinse aid. Also I recommended leaving a little sauce on dishes. Air gap was good."