Appliance Repair Farmington Minnesota

Customer stated dryer tumbles but has no heat. Found gas supply shut off to dryer. Turned gas on for testing and found flame would ignite briefly for two seconds, then shut off. Checked outside vent and found zero airflow, indicating a 100% blockage or broken dryer vent in wall. Customer stated vent cleaning company had just been there the previous week and issue started afterward. Dryer itself is heating and operating properly. Customer will contact vent cleaning company.

Replaced air tower, heater, thermostats, and control board. Tested unit and verified no more errors. Freezer is now starting to cool and operating properly.

Dishwasher was showing leak error. Found side water guide had popped loose and was leaking during fill and wash. Also found water fill tube into sump leaking. Applied caulk, tightened clamp on tube, tightened lock nut for water guide, and tested. No more leaks found. Dishwasher is now operating properly.

Replaced control board, fresh food evaporator cover, and drain kit. Tested unit and verified refrigerator is draining into drip pan and cooling properly.

Dryer tumbles but does not heat. Found high-limit thermostat open due to clogged and pinched venting. Reset high limit, realigned vent, tested unit, and verified dryer is now cycling heat normally.