Notes from real Omega Force service calls: the appliance, the problem we found and how we fixed it.
Repairs completed March 11, 2026 to March 12, 2026
Model PCFE3080AFH
Installed new control board and ran test cycle. Unit is working properly.
“While he couldn’t resolve my concern on my new range, Michael was timely, professional and knowledgeable! And now I know to ask before purchasing my next range on what increments I can set my oven to. Thank you Michael!”
Deborah H.
Model DLG7201WE
Disassembled dryer and removed damaged motor and blower wheel. Installed new motor, blower wheel, and dryer belt, then reassembled and tested. Verified dryer is heating and exterior vent airflow is adequate.
Model LFXS26596S.ASTCNA4
Customer reported refrigerator not cooling. Compressor and all fans were running, but both compartments were at room temperature. Replaced failed compressor and drier, performed software update, evacuated and recharged sealed system, and advised customer to allow 24 hours for cooling.
“Omega force made the whole process easy. Dakota was fantastic. Professional, efficient, and he got our refrigerator up and running again. Great experience!”
Ben R.
Model WDT730HAMZ
Customer reported dishwasher not washing dishes. Found wash pump error code and diagnosed failed pump assembly. Replaced wash pump, verified heater operation, ran test mode, and confirmed dishwasher is working properly.
“Communicated with us, arrived in a timely manner, got the job done quickly and with no mess left behind! And - an appliance that now works!! Thank you!!”
Bridget L.
Model ADEE9RYS178TW01
Customer reported back vent was burning clothing. Checked temperatures and found them normal. Per tech tip, replaced vent cover. If issue returns, weaker heater may be needed.
“Adam was amazing. He diagnosed the problem. Ordered the new part, went and picked it up and installed it all in the same day. Wonderful service.”
Jason W.
Model DUT36522X
Upon inspection found mice had chewed through drain line. Replaced damaged section using parts from Menards and verified no leaks.
Model FTF530FS3
Customer reported washer not draining properly. Found failed drain pump, customer approved repair, installed new pump, cycled and tested, and verified washer is working properly with no leaks.
“I have yet to receive my credit card receipt.”
Joyce B.
Model GCFG3060BFD
Customer reported left rear burner not lighting. Cleaned burner with brush and restored proper ignition.
“Great service, easy and on time. Very professional.”
Jessica M.
Model PLFU1778ES4
Diagnosed failed thermostat, installed new thermostat, and verified proper machine operation.
