Model LRFS28XBS.ASTCNA3
Replaced scratched refrigerator right-side door with a new door and verified proper sealing and cosmetic appearance.
“On time, in and out, done. Nate was polite and professional. Thank You!”
Alan S.
Notes from real Omega Force service calls: the appliance, the problem we found and how we fixed it.
Repairs completed November 17, 2025 to November 18, 2025
Model LRFS28XBS.ASTCNA3
Replaced scratched refrigerator right-side door with a new door and verified proper sealing and cosmetic appearance.
“On time, in and out, done. Nate was polite and professional. Thank You!”
Alan S.
Model EFLS527UIW0
Replaced a faulty water valve, verified strong flow and correct operation, and confirmed the appliance is working properly.
“Nate, our service tech, was knowledgeable about our issue - he was also polite, respectful, capable, and timely. I literally could not ask for a better experience. Thank you to Nate and Omega!”
Terri P.
Model MHW8200FC0
Found washer with bad main board, pressure switch, and drain pump motor; replaced all three components, verified no leaks, and confirmed the washer fills, drains, and spins properly.
“Outstanding job!!”
Gordon N.
Model WRS325SDHW05
Installed a new refrigerator ice maker and verified it cycles and fills correctly.
Model RF26J7500SR/AA
Customer reported refrigerator making the same noise as before; pulled the back cover, removed ice buildup, verified heaters are working, replaced the sensor, and confirmed normal sound and operation
“Brandon is friendly and professional. He arrived on time and got the job done.”
Pam T.
Model DLEX4000W.ABWEEUS
Replaced the dryer duct and heater assembly, tested all cycles, and verified there are no error codes.
“Nick is friendly and knowledgeable. We’ve had him service our appliances a few times and appreciate his good work.”
Trish A.
Model MGD6000XW0
Replaced the dryer thermal fuse, tested the unit, and verified normal heating and operation; used part WP3392519 (thermal fuse).
“Nick was polite, knowledgeable and quickly resolved our appliance malfunction.”
David K.
Model EFLS627UIW2
Addressed a clean-cycle E11 error by cleaning both dirty water filters, starting a new clean cycle, and advising the customer to monitor results since other cycles work properly.
“Mark was extremely knowledgeable and courteous.”
Peter G.
Model WT6105CW.ABWETUS
Resolved a washer not completing cycles by finding the cold water valve turned off, turning the valve on, running the unit through test mode twice, and confirming all functions operate properly.