Notes from real Omega Force service calls: the appliance, the problem we found and how we fixed it.
Repairs completed July 7, 2025 to July 8, 2025
Model U-2075RFW-00
Found high-side restriction near condenser; cleared blockage, pulled deep vacuum, charged with 2.8 oz refrigerant (vs. 3.5 oz); verified pressure and cooling?freezer reached 20?F during visit; advised customer to check after 24 hours.
“Hyrum is congenial conscientious, reliable, hard working and a real problem solver. Omega Force is very fortunate to have him in its workforce. I highly recommend him.”
Diane V.
Model LRFLS3206S.ASTCNA0
No water or ice dispensing after power surge; reset power and tested?valves now receiving power, dispensing water, and ice maker cycles properly.
“Very nice and fast work! Explained what broke in my fridge well too.”
Michelle M.
Model FDPC4314AB
Installed new spray arm, removed melted one, gave cleaning tips, and reinstalled rack badge?unit good to go.
Model WA45T3400AP/A4
Customer not home and all the doors are locked. Front, side and rear doors locked
“James was fast and honest.”
Tara J.
Model RF263BEAESR/AA
Returned to install evap fan motor . Unit is operating properly and is pretty cold so freezer should get to normal temp shortly .
“Courteous, on time and professional!”
Molly P N.
Model LRDCS2603S/00
Installed new compressor and filter dryer once installed pressure tested for leaks. Vacuumed under 400 microns. Filled with refrigerant and made sure it was working properly. Unit is now running at normal pressures and will be back at normal operating temps in 24hours can be longer for ice
Model LRFWS2906S.ASTCNA0
Installed filter head for customer. Went in tightly so customer was hesitant not to break it and didnt want to force it. Good to go
Model WGD4815EW4
Upon inspection unit had a maintenance kit compromise roller took you apart and vacuumed it out and replaced it with the maintenance kit verifying it sounds great after installation done
“Fantastic performance by your repair person and your easy-to-use contact system. Your desire to “restore order” to our lives was accomplished impressively. Thank you.”
Thomas O.
Model WM3575CW
Upon inspection ran diagnostics found that the motor was locked up used rotor position sensor from truck stock pulled unit out remove venting took stater and motor apart and replaced RPS did a diagnostic test after reinstall Inv?ntame in unit back into cut out running great spinning great draining great no leaks done!
“Collin was wonderful to work with! Based on the error code on the washing machine he was pretty certain what the problem was. He had it fixed and was out the door in less than an hour. He was kind, courteous, communicated well and very efficient. It was a great experience.”
Tiffany J.
