Notes from real Omega Force service calls: the appliance, the problem we found and how we fixed it.
Repairs completed May 19, 2025 to May 20, 2025
Model 90462157
Water is hot coming out of dispenser - found condenser fan blade separated from motor, but not broken. Reinstalled fan blade onto condenser motor. Refrigerator is now cooling correctly. Condenser fans, cooling compressor and condenser coils. That were very hot. All test good.
“Service was friendly and repair was made quickly. Exceeded expectations. Thank you!”
David F.
Model SLDF30540SS
Replaced touch panel with user interface. Tested and all buttons respond to touch. Tested and oven preheated and all functions are working well.
“Delton was thorough, friendly and gave excellent communication with what was wrong and how to fix it. We were so happy working with Delton.”
Justin T.
Model LFXS26973D/01
Installed new water valve from last diagnosis. Tested multiple times to make sure no leaks.
“Adam was thoroughly professional and competent. I would not hesitate to recommend him and Omega Force to anyone.”
Robert L.
Model GCFG3060BFC
Oven not heating and will get error 22 and wont start the oven. Error means communication error between user interface and relay board. I reset breaker and oven is heating and no errors. Oven was never used before.Home is a brand new build and I explained that its possible that there was a surge in the power since there is lots of construction and by powering off and on the range it has reestablished connection and is working now.
Model GFD65ESPV0DS
Returned and installed new terminal block assembly. Cut damaged section of harness out and replaced with new harness. Job completed.
Model EMFG527UIW0
Picked up belt since old has broken. Cleaned unit out thoroughly and maintenanced moving components. Tested once part was in. Good to go
“He was professional. The job was done in a timely fashion.”
Patrick / Julie F.
Model WDT730PHAZ0
Not draining - removed drain cap from garbage disposal - tests good
“Kinnon arrived on time and quickly diagnosed the issue. It was an easy fix and I was charged fairly.”
Jeff M.
Model RF28K9380SR/AA
Replaced ice maker. Ran test. All functions tested correct.
“Nick was on time, professional and friendly. Got the job done!”
Mary G.
Model MED5500FW0
Not heating. Found a bad heater. Replaced heater, cleaned hair and lint off of roller shafts. Vacuumed out lint from dryer. Also reattached a loose waterline from the back, for steam. No drips now.
“Omega was great! Especially Nate! He was polite, nice, and knew exactly what to do! He fixed my dryer in about an hour and did some extra cleaning to make sure the dryer had better longevity! Highly recommended Nate and Omega”
Brandon O.
