Appliance Repair Richfield Minnesota
Omega Force Appliance Repair Rated out of 5 stars based on customer reviews
We serviced a
ROPER DRYER
Model RES7648KQ0
Near Richfield, MN 55423
Delton
Job Details:
11/21/2023
Found that the dryer was full of lint and exhaust was clogged and no air was coming out of dryer I cleaned out inside dryer of lint build up. Tested with vent attached and still no air flow outside. Dryer vent is clogged as well. Used vent brush and cleaned out vent and now dryer has as it flow outside and dryer is cycling heat normally with vent attached.Charge for vent cleaning and inside dryer of lint as well.; saved tckt
We serviced a
FRIGIDAIRE DISHWASHER
Model FFCD2413US4A
Near Richfield, MN 55423
Nate
Job Details:
11/08/2023
"Replaced bad main PCB and door gasket and bottom door gasket wiper. Ran it, no leaks now. Drains great. Drain line is looped up high how its supposed to be. Old bottom wiper seal was deformed and old door gasket was compressed in all the way. Also raised front of dishwasher higher so that its level and not tipped forward."
We serviced a
FRIGIDAIRE DISHWASHER
Model FFCD2413US4A
Near Richfield, MN 55423
Nate
Job Details:
11/01/2023
"Stops before the cycle is done. Doesnt do final drain. Also has been leaking out from corners of door. Ordered new bottom wiper, door seal, and main PCB. Needs afternoon appointment. ; ordrd 1 5304531745 (Control) and 1 154827601 (Tub gasket) and 1 5304500204 (Gasket)"
We serviced a
FRIGIDAIRE DISHWASHER
Model FFCD2418US1A
Near Richfield, MN 55423
Nate
Job Details:
10/13/2023
"Not filling with water. Found the float assembly switch was bound up and not allowing voltage to the water valve. Disassembled the switch, cleaned it up and oiled parts. Now it actuates great and fills with water.
We serviced a
FRIGIDAIRE RANGE
Model FGF348KSH
Near Richfield, MN 55423
Nate
Job Details:
10/03/2023
"Taking a long time to pre heat, and also they have to set the temperature higher than the desired temp. Found a bad bake ignitor. Replaced the ignitor, ignites great now and heats great. Took temperatures and it heated up to set temperature of 400 within 10 minutes.