The customer said water was leaking from the ceiling in the fresh food and down into the crisper. Before she left for a trip she unplugged the fridge and it was off for a week. She plugged it back in 24 hours ago. I did not see any ice build up but when I poured water down the defrost drain water was leaking out the drain cup. The drain tube was clogged inside the fridge wall. I used my steamer and cleared the drain. I tried it again and now water is able to drain. Please charge card on file. ; (serial indicated as 'NotAvailable' so system created UIS w/pseudo #)

"Not spinning or draining. Found a bad lid switch. Replaced it, now it runs and drains great. ; used 1 3949247V (LID SWITCH) from stock"

"Oven gives an F2 error and then stops. Checked oven sensor. 2.3 k ohms at 77 degrees. GE tech support said it could be a bad cooling fan. Did a jumper. Also front right burner only works when on hi setting. Needs WB24T10134. . When running oven, the temp quickly jumped from 100 to 250 to 300 on the display. The temp sensor then Tested as open. Installed new temp sensor from truck stock. Ran oven at 350. Preheated great to 350. ; used 1 12001656DNS (LONG TEMP PROBE) from stock"

Customer complaint is nothing is cooling in either section. I pulled the refrigerator out and found the compressor Not running. I do get 120 V to the compressor inverter. I gave the customer a bluebook quote for the repair. Ordering the inverter and coming back tomorrow. ; schdld next appmnt for 12/7 WED !

The customer complaint was after the dishwasher was installed it slides back and is now not level. I got the dishwasher level and back on the board under the feet. I ran long screws behind the feet into the cabinet. I then put zip ties around the feet and the screws. I found both top mounting screws were loose. I tightened both screws. I raised the front left foot so now the dishwasher is more level.