Main pcb under the fridge making a clicking sound. Ordered new board. BB ticket attached. ; ordrd 1 5304504032 (Main PCB)

Installed part from last diagnosis. Working good now.

"Taking a long time to dry clothes. Used a 50 ft ladder to check air flow outside. 15 mph. Behind dryer, 28 mph. Found a long extension of flex vent thats all crimped and smashed up behind dryer. Cut out 4 ft of flex vent. Now air can flow well straight out. 185 inside dryer before shortening vent. 185 after. Runs great now."

"Customers complaint is not draining. Could hear the drain pump, but nothing was draining. removed Toe kick panel, vacuumed out all the water, removed filter and found a pair of clothing inside the filter. Removed article of clothing. Tested and working properly now.

"Customer complaint is getting a I 20 code. Went through test mode had saved and I 20 error code and I 60 for a heater. Unit went through test mode just fine. The 20 code is a drain code. The drain is working great. Clean pressure sensor as best. I can reassembled tested unit heaters working. drains working and everything working properly.