Maytag Dryer Repair. Customer states the dryer is making a noise. Disassembled found the back roller locked up, belt worn. Customer approved a new belt, pulley kit. Cleaned the unit out, installed the kit, checked and cleaned the back vent and found debris in the fan housing. Cycled and tested, unit working as it should.

"Returned with parts, removed the old gear case, took longer as the top spanner nut was stuck. Replaced the gear case, belt and striker. Ran Calibration the unit would not agitate, tested and found the actuator not working correctly, replaced ran the calibration again unit calibrated . Checked for leaks, no leaks at this time.

"Customer states the unit is making noise and the door latch is broken. Cycled and tested with water the unit would barely turn, drained water out tilted the machine back and found the unit had leaked out the oil out of the gear case. Ran diagnostics and found when it spins it is very loud. Quoted the customer the gear case oil and the customer approved. I informed the customer there maybe more parts in the the process of repair that will need replacing and they are aware. ; ordrd 1 W11454741 (Gear case) and 1 W10837741 (Strike) and 1 WPW10006384 (Belt)"

Returned installed the new wire and heat element. Cycled and tested ran unit to get rid of burn off smell of the heat element.

"Returned disassembled, found a wire going to the element broken. Repaired the wire. Put back together and tested. Informed the customer I had no spade terminal that large. Customer will use machine and if the issue comes back I will need to see if there is a heat element spade terminal that large. ; saved tckt"