Returned with parts installed, cycled and tested all 4 burners now are working as they should

Returned with part installed, cycled and test for leaks, no leaks found, the unit is running as it should.

"Customer stated there was water in the drip pan, customer cleaned out the water now the unit will not run.Cycled and tested found the unit drains the wash pump is not running at all, can hear the motor buzzing just not turning. Checked and found F9E2F8E4 codes. One code for the drain pump and one for the overflowing. Pulled the unit out and found the drain pump was ok could see debris in the housing removed the wash pump and found the filter/ chopper full of debris not turning. Removed all the debris put all back together cycled and tested the pump is still just buzzing. Customer approved the repair ; ordrd 1 W11416363 (Pump and motor)"

"Customer states 2 of the burners are not working.Found one side was not working swapped the burner assembly and found the issue was in the burner assembly. Tried cleaning the igniters and checked the wire for issues. Put back together and cycled and tested again, customer approved replacing the wire assembly and ignitors; ordrd 1 WP74005890 (Spark electrode) and 2 74004053 (Ignitor)s"

"Returned with parts, installed new venting, cleaned out the dryer, cycled and tested the dryer, the dryer is venting as it should and the noise in the dryer has gone away."