Minneapolis Dryer Repair

Image

DRYER REPAIR TIPS

  • Check the dryer vent to make sure it’s clear.
  • Record any error codes you see.
  • Turn the breaker off, and then back on, to verify it’s not tripped.
  • Unplug the unit for 2 minutes and plug it back in to reboot any circuit boards.
  • Make sure the unit is plugged in — plug a lamp into the outlet to verify that outlet has power.
  • If you have a gas dryer, make sure the gas is turned on behind the dryer, and on the supply line (usually by the furnace).
  • Run the dryer empty to verify if it is heating.
  • Make sure it is not on the air fluff setting.
  • Still stumped?  Call your service heroes

Recent Dryer Repair Jobs and Surveys

Omega Force Appliance Repair Rated 5.0 out of 5 stars based on 352 customer reviews

We serviced a
WHIRLPOOL DRYER
Model WGD5000DW4
Near Maple Grove, MN 55369
Nate
Job Details: 04/29/2024
Repaired a Whirlpool Dryer. Taking 4 cycles to dry clothes. Found the vent full of lint. Did a vent cleaning for customer. Lots of water and lint were removed from the vent. Before dryer was running at 105 with no airflow outside, now great airflow and runs at 175. Cleaned out inside of dryer too. Dryer runs great now. 20 ft vent. The moisture was so backed up in the dryer it was dripping through the basement ceiling and running down the side of the house. Everything good now. Charged for vent cleaning since thats not covered by WHE. Customer agreed to quote.
We serviced a
GE DRYER
Model GTD45GASJ2WS
Near Saint Paul, MN 55105
Jess
Job Details: 04/29/2024
Repaired a GE Dryer. Installed new operating thermostat. Tested, heating good.
We serviced a
MAYTAG DRYER
Model MGDC465HW0
Near Avon, MN 56310
Brandon
Job Details: 04/29/2024
Maytag Dryer Repair. Customer states the dryer is making a noise. Disassembled found the back roller locked up, belt worn. Customer approved a new belt, pulley kit. Cleaned the unit out, installed the kit, checked and cleaned the back vent and found debris in the fan housing. Cycled and tested, unit working as it should.
We serviced a
LG DRYER
Model DLE7400VE
Near Andover, MN 55304
Phillip
Job Details: 04/29/2024
LG Dryer Repair. Replaced control board tested timed and sensor functions - test good-
We serviced a
GE DRYER
Model PTDS850GM0WW
Near Saint Paul, MN 55108
Jess
Job Details: 04/29/2024
GE Dryer Repair. Gas dryer not heating very well. Round igniter has 393 ohms resistance. Filter on end of dryer vent was clogged with lint. Cleaned it out and dryer is heating much better now.
Sue
Avon, Minnesota
04/30/2024
I couldn’t be happier with the excellent service we received while getting our dryer fixed
Overall Experience
akaschinske
Chaska, Minnesota
04/29/2024
Everything was super smooth from scheduling to the repair to the payment. Everyone was professional and friendly. Easiest appliance repair ever- definitely recommend!
Overall Experience
LF
Eden Prairie, Minnesota
04/24/2024
Overall Experience
Tc99m
Hastings, Minnesota
04/22/2024
We have service plan via Home Depot & they use Omega Force. Besides taking a little bit of time to get repair set up with Home Depot, I appreciate the communication via text, email, & I could even call and talk to a person at Omega Force to change schedule. I especially like the text day before and day of repair, so we know the more specific arrival time and we can even track the appointment. Delton was great to work with. Thank you.
Overall Experience
Jake M
Minneapolis, Minnesota
04/18/2024
Aaron was punctual, detail-oriented and very kind. Will gladly call again in the future when needed.
Overall Experience