Minneapolis Washer Repair
WASHER REPAIR TIPS
- Unplug the unit for 2 minutes and plug it back in to reboot any circuit boards.
- Make sure both water valves are turned on.
- Clean the water inlet filters on the back of the machine.
- Some plumbers install flood-safe hoses — make sure those are allowing water to flow.
- Clean any drain filters before calling.
- Install a new drain sock if you use one.
- Make sure the drain tub is draining sufficiently.
- Record any error codes you see.
- Make sure the unit is plugged in — plug a lamp into the outlet to verify it has power.
- Make sure the unit is level.
- Still stumped? Call your service heroes
Recent Washer Repair Jobs and Surveys
Omega Force Appliance Repair Rated 5.0 out of 5 stars based on 270 customer reviews
We serviced a
SPEED QUEEN WASHER
Model SPQWASHER
Near Mendota Heights, MN 55118
Hyrum
Job Details:
03/22/2024
"Customer states that water is on the floor after every recycle they run. Filled the machine with water and started it running and didnt see any leaks internal or external to machine. Turned it to a spin and drain cycle and immediately water started pouring up over the top of the standpipe on the drain. Instructed customer that this is a drain issue not a machine issue, and that the plumbing will have to be fixed nor to get this machine going again."
We serviced a
WHIRLPOOL WASHER
Model WTW7000DW0
Near Champlin, MN 55316
Matt
Job Details:
03/22/2024
F5E3 - INPROPER LID CLOSURE - UNPLUG WILL NOT RESET. Theres a stored F5E2 and F5E3 error codes. These are both lid lock errors. Found the lid lock has failed. Customer approved repair. I ran to Dey and got part and installed. Tested and washer is working great. Washer is now fixed.
We serviced a
SAMSUNG WASHER
Model WA50R5400AV/US51
Near Burnsville, MN 55306
Delton
Job Details:
03/22/2024
Replaced all 4 damper shocks sent by ST. Tested with load of towels and washer now goes into full spin. No errors. Washer is working good.
We serviced a
SPEED QUEEN WASHER
Model AWN63RSN116TW01
Near Lakeville, MN 55044
Delton
Job Details:
03/22/2024
"Replaced the motor mount kit for GFCI tripping issue as well as the lid switch was not being triggered. I adjusted the lid switch plate so that it now switches on when lid is shut. Tested and GFCI no longer pops and washer fills, agitates, drains and spins. Washer is working good."
We serviced a
MAYTAG WASHER
Model MVWB765FW3
Near Dayton, MN 55327
Matt
Job Details:
03/22/2024
"LF error, WATER NOT DISPENSING FAST ENOUGH - CLEANED FILTERS - WON'T FILL AND COMPLETE. Found the cold water valve has failed. Customer approved repair. Installed new water valve and tested. Washer is filling and working great. Washer is now fixed.
Kim
Minneapolis, Minnesota
03/27/2024
Delton was on time, creative in his problem-solving (we have a stacked washer/dryer in a small space) and was efficient. I appreciated his patience and how completely he answered my questions. I would definitely use them again.
Overall Experience
Ibtherapies@comcast.net’s
New Brighton, Minnesota
03/26/2024
Was efficient and explained clearly what happened with washer lid!
The woman I spoke with was very kind and understanding. She explained how to get the referral from Speed Queen.
Thank you!!!
Overall Experience
Ramsey, Minnesota
03/26/2024
Washer is working good
Overall Experience
Minneapolis, Minnesota
03/26/2024
Nate was excellent. Very professional, knowledgeable and polite.
Overall Experience
Amy
Brooklyn Park, Minnesota
03/26/2024
Overall Experience