Sometimes the clothes are not dry when the cycle is finished. The air flow is good and no faults. I straightened out the duct and then replaced the duct sensor. The dryer is working and heating.

"The washer does not spin out every time we ran a normal and filled it up with water. The washer filled then we ran a drain and spin. The washer drains good and fast. While the basket moves back and forth there is a loud clicking sound in the basket. When I spin the basket by hand I can hear the sound. The motor is good and the shocks are good. It will need a basket bearing rebuild. ; snapped 1 QuickPics, states that autho needed"

"The microwave sparks from the wave guide when it runs. I removed the cover and found the magnentron antenna was burnt and the wave guide is chard. I think a new mag will eventually fail because of the wave guide. The customer said the wave guide cover has been replaced 2 other times because they were burnt up. She had the old one I took a picture of. ; snapped 6 QuickPics, states that autho needed"

The dryer would not start. I found. The belt was off. The idler pulley locked and failed. I replaced the pulley and vacuumed out the dryer. The dryer works good now.

"The washer does not spin out every time we ran a normal and filled it up with water. The washer filled then we ran a drain and spin. The washer drains good and fast. While the basket moves back and forth there is a loud clicking sound in the basket. When I spin the basket by hand I can hear the sound. The motor is good and the shocks are good. It will need a basket bearing rebuild. ; snapped 1 QuickPics, states that autho needed"